I’m well aware that I can rip most Blu-rays with MakeMKV and then convert to mp4 with Handbrake; however, the former just rips everything raw from the disk so the file size is humongous and the conversion via Handbrake for just a single file is terribly long and puts a lot of strain on my computer.

I’ve heard that EaseFab LosslessCopy is decent, but they only have a Windows and a Mac version, and I’m unsure how well it’d run under Wine.

I am willing to pay for it, but only as long as it’s not a subscription thing. Has to be a one-time payment.

Does anyone know any decent Blu-ray ripping software that fits these conditions and run well on Linux? Specifically, it would be either Pop!_OS or Linux Mint. (I’m still using Windows because I want to figure out some software alternatives before I do so I’m not caught with my pants down, so to speak.)

  • EveryMuffinIsNowEncrypted@lemmy.blahaj.zoneOP
    1·
    1 year ago

    I understand that. That’s what I was talking about with Handbrake. Problem is, when a single 23 min video file is 5 GiB in size, having Handbrake re-encode that just takes too long.

    (I tried doing it and the estimated time remaining around start was something like 3 days worth of having my computer run 12 hours a day without stopping. I want to make the file sizes smaller, not burn out my computer components. Lol.)

    • NoDignity@lemmy.world
      3·
      1 year ago

      Depending on your hardware you should be able to have Handbrake use your GPU to reencode the video much faster than your CPU. If you have Nvidia it would be Nvenc, Intel is Quicksync, and AMD is VCE. If you select one of those as your codec it should go much faster. Check the hardware encoders section on the Handbrake documents https://handbrake.fr/docs/en/1.4.0/technical/video-nvenc.html . Even if you were using windows you would run into the same problem at some point you are limited by how fast your hardware can process the video and no software can make up for that.

    • Octagon9561@lemmy.ml
      3·
      1 year ago

      Handbrake’s speed depends entirely on your settings. For example, in the video tab next to video encoder you can select codecs like H.264, H.265 or AV1. The newer the codec, the more efficient and space saving your result will be but also the more time it will take. You may or may not also see the same codec twice but with NVENC or some other hardware feature next to it. Those will be significantly faster. If you have a choice between multiple hardware acceleration options, I’d recommend picking Nvidia > Intel > AMD for the best results. If none appear, you could buy a newer graphics card that support those features if budget allows. Other than that, something else that also significant affects how fast Handbrake will be is the preset option in encoder option (also in the video tab). You can select everything from placebo to slow to fast to ultrafast. The slower the higher the quality but also the slower it will be. Faster presets will be faster but will offer lower quality.

    • cmnybo@discuss.tchncs.deEnglish
      2·
      1 year ago

      What settings are you using and what CPU?

      I used to transcode blu-ray movies with handbrake in H.264 using an i7-950 and it only took a few hours for a 2 hour movie.
      Try using the x.264 encoder in handbrake set to constant quality mode. Set the CRF to around 20-22 and use the fast preset.
      The slower presets significantly increase the encode time with only a small decrease in file size.

      • Octagon9561@lemmy.mlEnglish
        3·
        1 year ago

        Keep in mind that the RF values will be completely different if you use other encoders like H.265 or even H.264 with a hardware acceleration encoder. For 1080p, 20-22 is indeed appropriate but lower res like 480p will require a lower RF like 16-18 for the same quality. Meanwhile 4K will be fine with 24. Again, assuming you use the x264 encoder which is not hardware accelerated. For best results, I’d really recommend playing around with the settings and see what works best for you.