Well, not really sunglasses, but rather clip-on shades for my 3D-printed glasses

But here’s the thing: they’re FULLY 3D-printed. The “lenses” are in fact the finest and thinnest mesh I could print with our printer - basically one 0.1mm layer of 0.4mm lines spaced 0.4mm running horizontally, and an identical layer of lines running vertically right on top of it.

Is it perfect? No. The image through it is kind of “pixelated” But it’s surprisingly acceptable. It looks like this when looking through them:

View through the 3D-printed mesh

In real-life, it’s quite a bit darker than this. But the photo shows fairly accurately how it looks like seeing through them.

It works because the mesh is very close to the eyes and totally out of focus. And although it’s not optical-grade, the price is unbeatable 🙂

If you want to try printing it yourself, the model is here. It’s meant to be printed with a 0.4mm nozzle and a 0.1mm layer height - including the first one.

Double-check how the slicer slices the first two layers, where the mesh lives, because it easily tends to “simplify” the lines by not printing them, which is obviously not what you want.

EDIT: as others have pointed out in this thread, don’t use these shades as actual sunglasses without sticking some UV filter over the mesh on the inside. They’re not eye-safe as-is. I made them more for the challenge of making them than anything else.

  • yeahiknow3@lemmings.world
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    8
    ·
    edit-2
    21 days ago

    By mass, 0.5% of the average human brain is now plastic waste that has crossed the blood-brain barrier. Thank you for your contribution.

    • Imacat@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      21 days ago

      The majority of those microplastics come from synthetic fabrics, car tires, and paint. Things that notably degrade over time into little particles. These sunglasses probably aren’t going to see that kind of wear and tear.

        • Imacat@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          1
          ·
          21 days ago

          It isn’t trash if OP has a use for it. There are valid criticisms for 3d printing, but microplastics in your brain probably isn’t one. That’s coming from other sources.

          • yeahiknow3@lemmings.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            21 days ago

            Isn’t that the argument for the existence for every other piece of plastic out there? You also have to consider the cost. And the cost of your 3d printing hobby is plastic in everyone’s brains.