But people in the original Lemmy thread told me it was the Klan! The op, “Buttflapper” reports: “They were filming and had fake county employee badges, immediately trespassed and removed”. Surely they didn’t jump to conclusions and were wrong!
My guy early voting down in GA.
More radio spectrum. Voice and data capability. Licensed HAM nerd shit. Meshtastic is relatively a narrow unlicensed spectrum with bandwidth limitations. It’s about tinkering just like Meshtastic is but with a license.
I’ve seen that it tends to affect phones with a mechanical zoom camera. Like iPhones and Galaxy’s. My bike has apple car play built in, so I tend to just keep my phone in my pocket and use the cross bar controls on the left handle to navigate the menus, no need to take my hands off the bars to tap a damn screen while going over bumps.
How are your knees? I saw that episode as a kid. Mine make noises when I stand up.
The new-ish Federal Trade Commission head has been making a push to work on quite a few projects for the past couple of years. They have a very small resources and man-power compared to the war chests of multibillion dollar companies, but recently, somehow managed to bring charges against Google as a monopoly. This in my opinion is a good thing. I consider myself a social liberal and a fiscal conservative. I don’t like how our government seems to take the money of these companies and turn a blind eye as they do what they want in pursuit of the almighty dollar. I support her endeavors working for the interests of the majority of people and not those few with the most money.
The best upgrade I made for the Ender 3 for adhesion was a PEI coated build plate. I don’t know the specs of the V2, but the brand I went with was “Wham Bam Systems” mine didn’t have a magnetic bed so I had to purchase the kit with the magnetic plate, and stainless steel PEI coated build surface. It was nice being able to pull off the plate and pop prints off of it. Be careful printing PETG on PEI it can fuse to the PEI
If the V2 has some sort of leveling system make sure it’s working correctly or the PEI sheet isn’t really going to help. Mine did not. I had so many failures where the print head crashed into the sheet and gouged it. The Z end stop wasn’t the best. I added a BLTouch probe and flashed the firmware and it got much better.
Creality is good because they brought an entry level 3d printer to market for an affordable price, and people like me got into the hobby because of that. The price point shows in the parts they use to assemble it. I’ve clocked countless hours learning how to correct failures, and upgrade the cheap parts for better, more reliable parts, add features, modify and flash firmware.
Five and a half years ago I bought that ender 3 pro. I think it was around $250 USD. I probably spent over $300 more upgrading it and replacing parts. In retrospect I shouldn’t have cheaped out, but that’s the conclusion I came to. I no longer want to waste time fixing the printer. If I walk away and don’t print anything for weeks/months at a time I’d like to have confidence when I fire it up it’s going to work.
I ordered a Prusa MK4S about a month ago which was the top-end hobbyist printer back then, and I am blown away by the difference. Prusa may not be the top at the moment, but the quality and support is there.
I recommend that unless you have the free time, you’re willing to tinker, and are not easily frustrated, you should look into a higher quality brand.
Golf clap.
https://www.bbc.com/news/world-asia-china-64206950
https://asia.nikkei.com/Business/Business-Spotlight/Samsung-races-to-guard-its-secrets-as-China-rivals-close-in
https://www.axios.com/2018/05/24/china-intellectual-property-ip-theft-trade-war
https://www.bloomberg.com/news/articles/2012-03-15/inside-the-chinese-boom-in-corporate-espionage
https://www.theguardian.com/world/2009/jul/22/germany-china-industrial-espionage
Ethernet speeds historically were measured in 10/100. In my past life I worked for an a small rural isp. And part of my learning I was taught that cat5 was 8 strands of wire, or 4 twisted pairs. I got very familiar with crimping patch cables. If one strand were cut a network card would negotiate down to its lowest speed and still work at 10mbps. Operating on 4 wire or two pairs. It’s possible with those numbers you had a bad connection, or a broken strand in the cable and it auto negotiated down to 10mbps. To this day I still crimp my own cables, and I own a cheap cable tester to make sure the crimps and cables are good.
I’ve had very bad luck with raspberry Pi’s and SDCards. They just don’t seem to last very long. I swapped to usb storage and things got somewhat better. I just had a usb drive die after 3 to 4 years of use. When I was still using SD it seemed like multiple times a year. Heat. Power loss, you can only punch holes in silicon so many times before it wears out. Whatever the reason.
My approach for this is configuration backup not the entire os. I think this approach is better for when it’s time to upgrade the os or migrate to a new system.
For my basic Pi running WireGuard and DNS, I keep an archive of documentation on steps to reconfigure the system after a total loss. Static configs are backed up once, and If there are critical configuration items that change then I back those up weekly. I’ve got two systems (media related servers, not Pi’s) that I keep ansible playbooks to configure 90% of the system from scratch so it’s as hands off as it can be.
Old I.T. Proverb: Documentation is like sex. Even bad documentation is better than no documentation at all.
Die a hero or live long enough to become a villain. Kurt punched his card before it could happen to him too.
Synology Diskstation DS1522+ $699.00
Synology Diskstation DS1621+ $899.99
Some of those apps are available through the community package center. If not then you can run a docker environment or a virtual machine on the DS and run whatever you want. It’s got a lot more horsepower than a single board computer, but I still recommend separation of duties and let the NAS be a NAS. Put your services on a server or separate virtual environment.
This is my DS16xx+ and expansion bay
Exactly the kind of thing I would expect to mildly infuriate someone who wears socks labeled right and left.
Can’t upvote today, and my account seems to be labeled as a bot.
Influxdb is a “time series” database for storing metrics. Temperatures, ram usage, cpu usage with time stamps. Telegraf is the client side agent that sends those metrics to the database in json format. Prometheus does pretty much the same thing but is a bit too bloated for my liking, so I went back to Influx.
Grafana, influxdb, telegraf agents. Easy to setup. Barely any configuration required. Everything you asked for in the default telegraf agent config. There are dashboards with plenty of examples on grafanas website.
The two D’s are for a “double-dose of pimpin”.