Nvidia is making a thing and selling it. No matter what happens with AI tech, they are going to keep their winnings.

Everybody else… well they borrowed/raised and spent a FORTUNE on R&D, chips, and electricity to make a product that has no realized commercial value (yet?). They are either going to figure out where the money comes from soon or the bills gonna come due. The next 12 months are going to be popcorn worthy if you like watching the tech industry.

I have to know what the Detroit soccer team did to get so high on that list. Somebody here must know. Please!

“Privacy” means two different things depending on the audience. For me privacy means that my information is not being used to advance some organizations commercial interest. For others it means that my information will never be shared with a government.

Don’t advertise to me

Or

Don’t narc on me

I guess I don’t really expect a company to resist pressure from government agencies on my behalf. Especially if I have been using their service to commit crimes in my country. If you are doing things your government would prefer you didn’t, hire a good lawyer and consult with them about what should be sent via email (spoiler, it’s nothing). The mafia doesn’t send emails, or put anything in writing, if you do crimes, you shouldn’t either.

My dude, never underestimate wall streets ability to ignore tsla failing. They will hold that stock. Shorting tsla is a fools errand. The people who own tsla are immune to reality.

Everything good that tsla owners were banking on has already happened. The gravy days are in the past but… the insane valuation persists.

You cannot short stupidity.

There is no world where a 3rd party ticketing company should be able to own, or develop exclusive relationships with a venue operator.

The promoter, act, and venue operator should negotiate how tickets will be distributed when they draw up contracts. In this fucked up reality, the ticketing company owns the venues and controls all access to tickets and their distribution.

TM would still do tons of business in that world. They actually offer a compelling product to acts, venues and promoters, but they should always be in competition with the act and the venue box office.

TM and live-nation should be competitors but they have been allowed to form a vertically integrated monopoly. THIS is the actual shit the FTC was built to combat.

Oh wow, that sounds like a cool project. I will look into it.

I ended up making an awesome esphome rig for my garage door. An esp32 board, a magnetic switch for position detection and a little relay that closes for .5s connected to the wall button wires.

Super simple and it works crazy well. It also cuts out all the proprietary shit the manufacturer would prefer I use.

The wired Nic on mine is dead, WiFi only now. one time modeled and 3d printed a part to fix the feeder. I will keep this fucker running forever.

Wall Street investors gave him the money. Him knowing that they would be dumb enough to give it to him is the reason he got it. Which is a weird way of “earning” money but it kind of is.

Despite our feelings on the company, Wall Street ate that shit up, thus his equity package is worth all that money. Why did Wall Street like Reddit stock so much? I sure don’t fucking know, which is why I never thought to ask them for hundreds of millions of dollars for a company that loses money hand over fist.

It’s so strange. I have realized over the last few years that I think I prefer apples stuff to Google or Microsoft but like, they ain’t my family. Just the least bad tech company I can buy certain products from.

These suits will either make the products slightly better or change nothing at all. Why the fuck would any consumer be upset by that???

There are so many things you can do to make these cheap printers reliable that I really could not list them all. When it comes to bed and first layer issues here are the biggest ones

Make sure your X gantry is tight and not sagging. The eccentric nuts on the guide wheels should be set so that there is very little play. If you lift the left side it should not move much without raising the gantry.

Tram your bed with the screws almost bottomed out. Loose screws mean that the bed is moving more and will not likely hold a level for long.

The bed must be warm during abl. these things warp and twist like crazy when you heat them. You will not get good results on these cheap ass beds if your machine measures its shape cold.

If you are not using a pei coated sheet to print on buy one asap. It is a superior print surface and a huge leap in print technology. It’s less important with pei, but it is worth noting that the print surface must be clean. Oils from your fingers mess with adhesion to the print bed.

Those are the big ones. There are like I said a million little things you can do. These things can be made into reliable work horses but it takes A lot of research, work, time, and often money to make them such. My ender 3 has cost me more than a prusa would have, which is pretty dumb tbh. On the other hand, it’s mine and there is no part of it that I do not understand. I like my printer. It’s very fast, very reliable, and I made it that way.

Trust is when two or more companies secretly collude against the interest of customers. That is what you would find in a textbook anyway. This is more an abuse of monopoly.

Art is media that conveys emotions and ideas from one human to another. Unless a machine has emotions of its own, it cannot make art. It is just making media.

Ha, I roasted you for having the good sense to let somebody else handle some of this stuff for you.

Nobody in crazy rabbit hole club is allowed to do anything the easy way!!

I definitely did not claim it was braking privacy. As far as I can tell it was just querying an update server but for some reason it was doing it with such frequency (hundreds a minute for hours out of the day) that I deemed it was broken and that the OS was not managed well.

Other people took a more suspicious view but mostly they just lost my trust that they had any business running a system on my network. If you google around you can get more nuanced takes I don’t actually know if they ever fixed it.

HAOS is a managed operating system, which is perfect for people who want to automate their home but don’t want to manage a Linux machine. It’s a little wild to me to see a person in this community advocating a managed OS. Like, what are we even doing here??

I killed HAOS and set it up in docker because it was phoning home a lot. Sometimes there were hundreds of dns queries a minute to HA servers. No thanks.

One more vote for the SKR mini e3. Best upgrade you can do for one of these printers.

It’s a 2015 Mac book pro that runs Monterey which still has update support. Getting new versions isn’t really important, getting support and updates is all that matters. I expect them to drop Monterey support at the end of this year which will be about a 10 yr service life. That seems pretty good to me. I have never had a windows laptop last 10yrs. And even at its age it is surprisingly pleasant to use with Mac OS.

Regarding Linux support, I started with Mint and everything works but the WiFi is a little slow. It looks like there has been some work to address that but I haven’t had time to try it out. It might be my favorite laptop I’ve ever had and it was only $100.

Just thought an old MacBook to put Linux on. Thing is almost 10yrs old and still has OS support from Apple That’s not too bad imo.

Chromebooks are the really fucking villain. 3-4 yrs and it’s off to the landfill. What the fuck?

Fascinating. A whole hidden world.