Everywhere, except India, it’s about 3%.
With India the average is a bit more than 4%.
Errar es humano. Propagar errores automáticamente es #devops
Everywhere, except India, it’s about 3%.
With India the average is a bit more than 4%.
Sorry, I can’t hear you over the artillery noise.
Wait.
Does Portainer ask your email? I haven’t used it in years. I though it was just a container that you run, with mounted docker socket, and that’s it.
Is it now doing some “telemetry” and sending user data, like email, to their servers? If so, I’m glad I’m not using that anymore.
Well, thank you for pointing me to this project. Didn’t know about it. I’ve just built it. So, the part of I’ll do my best to see what can I help with applies here to.
The project management may have some obvious problems (jOin dIsc0Rd sErVEr; w0rD “thEy” t0o p0liTicAl). But we really need an alternative to browsers funded by Google (Chrome and Firefox).
So I’ll do my best to actually build from sources and see what can I help with. Attacking the author is helping nobody.
And for the folks who are saying “wHy n0t rUst”, you can always show me the (rust) code.
VPS + VPN is the cheapest option I believe for the services. It doesn’t have to be “elaborated”.
You can port-forward public VPS ports to your private addresses/ports. If you don’t want to use iptables
you can use firewalld
.
The only “but” will be latency. For gaming it won’t perform as you may need.
It’s no longer open source. Big Deal in my books.
Vault features are cool. I really like it. But with Hashicorp now there is this big risk of “rug pulling” regarding its license.
The wise thing, in my opinion, is to avoid this company as much as possible.
you are a printer we are all printers
Oh, it’s gonna use polkit. Sudo bloat is a grain of sand compared to polkit.
Why people want to replace sudo with polkit? Visudo is no near as obscure as configuring polkit.
I hope distro maintainers don’t follow this.
Nobody likes Adobe, nobody wants to work with Adobe. Nobody can avoid Photoshop. That’s just the world we live in and I don’t like it.
This sounds like Stockholm syndrome. You are just too familiar with Photoshop, so using anything else is hard and less efficient.
In photography there is this mantra about “the most important part is right behind the camera”. A good photographer is not a good Nikon user, or good Canon user. A good photographer can deliver decent pictures with a potato camera if needed.
Sure, a potato camera is less efficient for any work that an actual good one. So it’s good to invest in a good brand. But the point is: if you are not capable to make average results with a potato software, the problem is not in the software.
Hey, ChatGPT, my uncle says new Macbooks are just glorified Raspberry Pis.
How many MB/s are in a Raspberry Pi?
It’s in the archwiki 😤😤😤
I used a hand dust blower intended for photography gear. I opened the laptop, blew the dust, disconnected the SSD and blew the socket and it’s surroundings.
Now I will monitor the logs and see if it helps.
Thanks.
I opened it. All cables were looking good. I used a hand blower to clean the dust. Taked out the SSD and blew the socket and everything around.
Now I’m going to monitor if it keeps happening.
$ journalctl --since yesterday | grep -c "nvme 0000:02:00.0: PCIe Bus Error: severity=Corrected, type=Physical"
16
sudo smartctl -a /dev/nvme0
$ sudo smartctl -a /dev/nvme0
[sudo] password for ****:
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.6-arch1-2] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: INTEL HBRPEKNX0202A
Serial Number: BTTE95101RQM512B-1
Firmware Version: G002
PCI Vendor/Subsystem ID: 0x8086
IEEE OUI Identifier: 0x5cd2e4
Controller ID: 1
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Fri Mar 8 12:09:53 2024 CET
Firmware Updates (0x14): 2 Slots, no Reset required
Optional Admin Commands (0x0016): Format Frmw_DL Self_Test
Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 32 Pages
Warning Comp. Temp. Threshold: 77 Celsius
Critical Comp. Temp. Threshold: 80 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 3.50W - - 0 0 0 0 0 0
1 + 2.70W - - 1 1 1 1 0 0
2 + 2.00W - - 2 2 2 2 0 0
3 - 0.0250W - - 3 3 3 3 2000 5000
4 - 0.0040W - - 4 4 4 4 5000 9000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 30 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 32%
Data Units Read: 6,877,173 [3.52 TB]
Data Units Written: 9,397,485 [4.81 TB]
Host Read Commands: 54,359,124
Host Write Commands: 239,213,047
Controller Busy Time: 2,412
Power Cycles: 536
Power On Hours: 6,350
Unsafe Shutdowns: 62
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged
Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
Num Test_Description Status Power_on_Hours Failing_LBA NSID Seg SCT Code
0 Extended Completed without error 6334 - - - - -
1 Short Completed without error 6334 - - - - -
OK. I’ll use a dust blower for photography gear. Thanks. Let’s see if it works.
I did a short and a long test. It looks good
$ sudo smartctl -l selftest /dev/nvme0
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.6-arch1-2] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF SMART DATA SECTION ===
Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
Num Test_Description Status Power_on_Hours Failing_LBA NSID Seg SCT Code
0 Extended Completed without error 6334 - - - - -
1 Short Completed without error 6334 - - - - -
git is already a decentralized version control software. Your local git repos are mirrors by themselves.
Put some
git fetch
in a server crontab, and you’re done. You can access them via ssh if your user have permissions.