I had installed Debian on an Acer Aspire One Laptop. It has a 32-bit Intel Atom CPU with just 1GB of RAM. I obviously can’t run it like a usual desktop anymore, it’s way too slow.

I tried it to connect it to my TV with HDMI to create some sort of “Smart TV” setup, but that didn’t work out because I can’t even play 1080p videos on VLC with it smoothly.

So… What now? Can I only use it for headless stuff like pihole, nextcloud, etc. now?

Is there any hope left for my unsuccessful “Smart TV” contraption?

    • Teppichbrand@feddit.org
      link
      fedilink
      arrow-up
      10
      ·
      1 month ago

      You can get an old Raspberry Pi very cheap, i have a 2b but you can go even lower. It’s probably a better idea to spend a few bucks and install DietPi with Pihole on it. It uses only 5 watts, your laptop takes probably ten times more.

      • muhyb@programming.dev
        link
        fedilink
        arrow-up
        5
        ·
        1 month ago

        While this is true for my another older netbook (40 W), my netbook’s power consumption for running Pi-hole is ~15 W. I think it’s acceptable for such operation. 5 W is tempting though.

      • Telorand@reddthat.com
        link
        fedilink
        arrow-up
        5
        ·
        1 month ago

        This is a very good point, and it’s one of the reasons I don’t use my old laptop as an always-on server.

  • anon5621@lemmy.ml
    link
    fedilink
    arrow-up
    12
    ·
    1 month ago

    Btw videos not working well because of absense of hardware decoding codecs, and it is make software decoding.

    • GnuLinuxDude@lemmy.ml
      link
      fedilink
      arrow-up
      7
      ·
      1 month ago

      Since it’s an old acer netbook with an Intel atom cpu it is highly unlikely it has any hardware decoding built in.

  • ExtremeDullard@lemmy.sdf.org
    link
    fedilink
    arrow-up
    8
    ·
    edit-2
    1 month ago

    Funny you should ask: I installed Debian 32-bit on an old Asus Eee PC netbook yesterday to breathe new life into that old machine and turn it into a controller for a piece of test equipment we have at work. My company keeps old stuff like that around until space is needed in case someone needs something.

    Just in case I had to modify something in the tester’s control software, I figured I’d install i3wm and Vim. It didn’t take long and I was surprised by how usable the machine ended up being. Honestly I wouldn’t have minded using it as a bone fide laptop for light-duty work on the go.

    So basically keep your expectations low and install super-lightweight software, and your old Aspire could live a few extra productive years instead of going to the landfill.

  • data1701d (He/Him)@startrek.website
    link
    fedilink
    English
    arrow-up
    8
    ·
    1 month ago

    In addition to the good suggestions for others in this thread (like setting it up as a portable gaming device or a server of sorts), it could also be set up as a low-distraction productivity machine. I don’t know how well something like LibreOffice would run on it, but I imagine you could probably use a simpler word processor or even a plain text editor.

    Worst comes to worst, I wonder what hardware support for this thing is in something like ReactOS or FreeDOS.

  • bloodfart@lemmy.ml
    link
    fedilink
    arrow-up
    7
    ·
    1 month ago

    There’s lots of uses for it.

    An overlay network like nebula uses “lighthouse” nodes as ways to reverse proxy to all the other hosts in the overlay. I’ve used og eeepcs as nebula lighthouses before.

    “Dumb” 3d printers honestly don’t need much to bring their feature set in line with expensive ones. I still use an old netbook to control two. The screen and keyboard are great when I want to check files. Slicers and whatnot can easily run in low resource settings on those computers.

    Vents allowing (and many netbooks do!), you can slide the computer into a shelf and use ssh to perform tasks on it. There’s a bunch of stuff that an always on computer with a built in battery backup can be used for at times, especially if it’s on a wired connection and you can use the wireless interface.

    People will say you should be afraid of the batteries exploding or venting. I’m honestly not too concerned, but be sure to check them maybe once or twice a year.

    • ReversalHatchery@beehaw.org
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 month ago

      People will say you should be afraid of the batteries exploding or venting. I’m honestly not too concerned, but be sure to check them maybe once or twice a year.

      I’m more concerned with the power supply. Laptop power supplies often heat up a lot.

  • kent_eh@lemmy.ca
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 month ago

    I’ve used old laptops as battery backed up NAS boxes.

    Obviously assumes that you can install a reasonably large drive and that the battery still has some life left in it.

  • Eugenia@lemmy.ml
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 month ago

    You can install Haiku, the BeOS clone. That one runs well on less than 1 GB of RAM, and it had a new beta recently. Linux requires a minimum of 2 GB RAM these days to load 1 tab on a browser of a middle-complexity website, before it starts swapping. To really use Linux more comfortably, you’d need 4 GB, I’d say. And if you want to do 1080p video editing as well, then 8 GB. So, try Haiku.

  • TurboWafflz@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    1 month ago

    I have a very similar spec Asus Eee PC that I use NetBSD with i3 on and it’s fine for like taking notes in vim or listening to music with strawberry. It can also run Haiku fine which I might switch to on it at some point because Haiku is fun. Anyway my best use idea is just use it to explore operating systems you’re curious about

  • bloodfart@lemmy.ml
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    1 month ago

    Some more things I’ve used old netbooks for:

    Portable pxe boot server

    Audio source for mixing (think using a mixing board to do audio collage work with tape, record and digital sources)

    Midi sequencer- the cheap usb to midi breakout cable works good here and you really don’t need much horsepower to sequence midi.

    Tracker playback and editing

    Display driver/art/digital photo collage/digital signage/whatever.

    E: People will tell you that you’re better off with a sbc because it’ll save you money on power. Do your own research on this. A kill-a-watt is cheap and the power savings quickly gets murky.

  • Eggymatrix@sh.itjust.works
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    1 month ago

    So i actually have the same laptop and had a ton of fun installing arch on it over the last christmas holidays. The experience made me understand a lot, triggered my new love for arch and was a fun project overall.

    I ended up having a stable CLI setup with ytfzf and mpv to watch my favorite yt channels in glorious 720p, got bluetooth working for my headset and all. Very fun experience.

    Edit: i am unsure on the 32bit part, I think mine is 64, could be another generation. In any case i also have 1gb of ram